Easy to print and build Whopper Plopper. 70mm long, but easy to upscale. Use 0.6-0.8mm wire for 100% scale, 0.8-1mm wire for 120% scale and 1-1.2mm wire for 140% scale. Only use spring steal wire!
For instruction scroll down.
Update:
removed the support structure, so the hole is not blocked anymore
Print settings:
100% infill
2 outer lines
no support
no top and bottom layers (only important for S3D users)
Print orientation like on pic 4
If you want to support me, check out my other lures i sell:
https://cults3d.com/en/3d-model/gadget/crankbait-fishing-lure-domi1988
https://cults3d.com/en/3d-model/gadget/fat-crankbait-easy-to-print-and-build-one-piece-print
https://cults3d.com/en/3d-model/gadget/4-piece-swimbait-fishing-lure-14cm-easy-print-and-build
| whopper_plopper_body.stl | 3.5MB | |
| Whopper_Plopper_Tail.stl | 1.2MB |
