Whoop Drone Cross 4S Night Flight Acro 3D Printer Model
The file 'Whoop Drone Cross 4S Night Flight Acro 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Whoop Drone Cross 4S Night Flight Acro 3D Printer Model' is (stl) file type, size is 1.2MB.
Here is a whoop cross 130 mm (axis to axis) in Polycarbonate and TPU Ultimaker.
It was developed to be highly visible at night.
It is equipped with :
Mini controleur F4 betaflight :
http://www.banggood.com/fr/Mini-ACRO-F4-Betaflight-Flight-Controller-Buil-in-PDB-5V1A-BEC-with-Micro-Buzzer-p-1110441.html?p=LD020411878172015024
ESC 4X 20AMP Bheli S V2:
http://www.banggood.com/fr/Racerstar-RS20Ax4-V2-20A-BB2-48MHz-Blheli_S-2-4S-Opto-Oneshot42-Multishot-4-in-1-ESC-for-FPV-Racer-p-1080541.html?p=LD020411878172015024
Brusheless 1707 3900kv:
http://www.myrcmart.com/rcx-h1707-3900kv-micro-outrunner-brushless-motor-p-9434.html
Small supply of screws:
16xM2 12 mm to fix the brushless on the support motors.
12xM1.6 + 12xM16 nut to fix the brushless supports to the chassis
| Fixation_lipo_whoop_130mm_1707.stl | 1.3MB | |
| Fixation_V2_moteur_whoop_130mm__1707_.stl | 998.9KB | |
| Joint_2mm_fixation_moteur_whoop_130mm1707.stl | 339.6KB | |
| Joint_3mm_fixation_moteur_whoop_130mm1707.stl | 347.5KB | |
| Joint_6mm_fixation_moteur_whoop_130mm_1707.stl | 339.6KB | |
| Pied_turbine_whoop_130mm.stl | 800.9KB | |
| Tiny_whoop_v2_130mm_1707.stl | 8.9MB | |
| Top_Plate_30.5x30.5_grille__whoop_130mm_1707.stl | 464.4KB |
