White Cat Hueforge 3D Printed Textured Art 3D Printer Model
The file 'White Cat Hueforge 3D Printed Textured Art 3D Printer Model' is (stl) file type, size is 27.2MB.
The file 'White Cat Hueforge 3D Printed Textured Art 3D Printer Model' is (stl) file type, size is 27.2MB.
Hi Everyone!
This White Cat is available for COMMERCIAL use, as well as ALL of our other hueforge projects on our Patreon. You Only see 10% Here On Thingiverse! patreon.com/DENUSA
We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer).
The Second version is just the STL, the information will be below.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Jade White for the rest.
| BlackandWhiteCat_Front_240x240_1.stl | 138.0MB |
