For Whirlpool Models
Part was printed using PLA matrial on a heated bed with modified CURA settings, see below.
The part is functional, and currently in service.
Layer Height: 0.1
Shell Thickness: 2
B/T Thickness: 2
Fill Density: 20%
Print Speed: 30
Print Temp: 215c (PLA)
Bed temp: 60c
Support Info:
Type: Everywhere
Type: Grid
Angle: 60
Fill: 30%
Brim: Yes
Edit: Printing the part horizontally will allow the part's 'Spring' to be printed accurately.
Approximately 1.5Hours for finished product,
| Door_Strike.stl | 42.4KB |
