Wheelchair Magnetic Mount For Reacher 3D Printer Model
The file 'Wheelchair Magnetic Mount For Reacher 3D Printer Model' is (STL,stl) file type, size is 932.0KB.
The file 'Wheelchair Magnetic Mount For Reacher 3D Printer Model' is (STL,stl) file type, size is 932.0KB.
This mount is designed for permobil wheelchairs with the side track rail. The mount makes a standard reacher more accessible by simply attaching magnetically. The posts are wide enough to extend slightly past the typical brackets that hold thigh supports. This also provides increase clearance for the hand to hold the reacher between the two round discs on the reacher.
Fits the "Featherweight" reacher. This is the traditional aluminum reacher. There are slight variations of this reacher that look very similar. The discs that hold the magnets may or may not fit depending on the brand.
See Picture for different types of discs:
1) Twist and Lock - Easily attach without extra hardware. Optional piece of CATTONGUE Grip Tape shown in one picture for extra friction to prevent from sliding on the reacher
2) Bolt On - Use this version for stronger application
Parts required:
1) Posts
2) Bolt On Disc
Recommendations for Printing:
1) Print in PETG for extra strength and heat resistance
2) Posts, print as oriented (Vertically with hole for magnet on top) - use support (80% infill)
3) Discs - (twist and lock) - no support needed), (Bolt On) requires support (100% infill)
| DOUBLE1.STL | 250.4KB | |
| double_mag_threaded.stl | 1.3MB | |
| performbil_track_single_bolt_version.stl | 430.5KB | |
| permobil_track_double_bolt_version.stl | 671.1KB | |
| threaded_top_double_mag.stl | 210.1KB |
