This is a collection of 28mm terrain intended to be a "one-stop shop" for a full table of miniature terrain to play warhammer 40k. This collection of terrain is designed to be used with the table layouts designed for the WTC 2021 tournament found here:
http://worldteamchampionship.com/wp-content/uploads/2020/09/WTC-2021-Terrain-Maps-9.31-Low-Res.pdf
Sizes are slightly reduced from the WTC specifications to fit the print volume of the Ender 3.
This collection remixes the modular terrain system created by ironcheese: https://www.thingiverse.com/thing:2779046
EDIT: The holes on the 3 story stls were a bit too narrow to comfortably fit the hooks of the floor. I've updated them now and am doing another test print. Please re-download the 3 story stls!
EDIT2: I noticed that the tolerances of my 3d printer are wonky and were causing the 2 story ruins to not snap together cleanly every time I printed it. Included a new STL with slightly larger holes for the floor hooks that works a bit better for me, but keeping the old one for people who might like a firmer lock. With that I am considering this collection complete! I hope you all enjoy it and let me know if you have given this a print! :)
| Final_long_2_story.stl | 2.2MB | |
| Final_long_3_story.stl | 14.3MB | |
| Final_short_2_story.stl | 19.4MB | |
| Final_short_3_story.stl | 18.7MB | |
| forest_base.stl | 1.8MB | |
| hooked_floor.stl | 6.0MB | |
| Industrial_Fan.stl | 6.0MB | |
| long_wall_2_story_wide_hole.stl | 2.5MB | |
| resized_crate.stl | 2.9MB | |
| short_wall_2_story_wide_hole.stl | 19.3MB | |
| tree_bottom.stl | 155.4KB | |
| tree_top.stl | 156.5KB |
