Welding Fence Blocks 2.5 Inch Hole Center — REMIX 3D Printer Model
The file 'Welding Fence Blocks 2.5 Inch Hole Center — REMIX 3D Printer Model' is (stl,3mf) file type, size is 177.6KB.
The file 'Welding Fence Blocks 2.5 Inch Hole Center — REMIX 3D Printer Model' is (stl,3mf) file type, size is 177.6KB.
I remixed the two main components of this set. For some reason, my welding table has holes at 2.5 inch center to center. The other files are just copied, as they are one-pin blocks.
The two-pin pieces are sized to rest on another block on adjacent hole to prevent side motion. Just play with them and you'll see (look at picture)
Printed with PLA (it melts if your are not careful!) with nothing special.
| fence_block_1x1x1in_16mm.stl | 20.0KB | |
| fence_block_1x1x2in_16mmmost_common.stl | 19.4KB | |
| locating_pin_round_1x1in_16mm.stl | 31.1KB | |
| locating_pin_round_1x2in_16mmmost_common.stl | 31.1KB | |
| welding_fence_block_2.5_inch_holes_1_inch_square_127_L_x_63.5_CC_x_25_Section_x_16_Hole_mm_v2.3mf | 53.6KB | |
| welding_fence_block_2.5_inch_holes_1_inch_square_127_L_x_63.5_CC_x_25_Section_x_16_Hole_mm_v2.stl | 17.5KB | |
| welding_fence_block_2.5_inch_holes__45_deg_127_L_x_89.8_CC_x_25_Section_x_16_Hole_mm_v1.3mf | 81.5KB | |
| welding_fence_block_2.5_inch_holes__45_deg_127_L_x_89.8_CC_x_25_Section_x_16_Hole_mm_v1.stl | 67.5KB |
