Enclosure for the NodeMCU v1.0 and an OLED display (128x64).
The NodeMCU is mounted onto a small breadboard (35x46mm) and a local temperature and humidity sensor on the top (Adafruit AM2302)
The code and wiring setup for this station is available here:
http://blog.squix.org/2015/12/esp8266-weather-station-measuring-2.html
This setup can be use for any project involving a NodeMCU or a small dev board and an OLED display.
I know the 2 wifi cutouts on the side can make the print a bit challenging.
Do not hesitate to comment if you have ideas for improvements or simply like it.
| Weather_Station_bottom.STL | 196.7KB | |
| Weather_Station_top_2.STL | 194.3KB | |
| Weather_Station_top_flat.STL | 55.7KB |
