Clickwheel for Caverna game to track weapon strength without having to fiddle with those annoying weapon strength chits.
Each disk is a little bigger than the original discs in caverna (but not too much, they still fit nicely on the board and stack well).
The numbers go from 1-14, with the backside being used for 0 weapon. The wheel turns very easily and the 'click' is really just there to keep it from accidentally turning.
The top and bottom should have some type of adhesive, although they do fit pretty tight. I printed mine in ABS and used ABS slurry (abs melted into acetone) in the hole in the bottom, and then along the seam between the top and bottom. Be careful to not get any adhesive on the wheel itself of course!
I am going to have my wife make some art for stickers on both sides that is similar to the weapon chits in the game. These will be printed off as stickers and put on both sides. I will probably update this with the stickers or a link to them when they are done. It might take some time to find time.
| bottom.stl | 836.6KB | |
| middle.stl | 9.0MB | |
| top.stl | 321.6KB |
