Wave Pattern Lamp Shade 3D Printer Model
The file 'Wave Pattern Lamp Shade 3D Printer Model' is (stl) file type, size is 74.6MB.
The file 'Wave Pattern Lamp Shade 3D Printer Model' is (stl) file type, size is 74.6MB.
update 2020/4/26
I made new design with larger pattern.
The height is 11.8cm, and the outer diameter is 7cm.
Small pattern shade is thinner since it takes very long time to print.
I hope you like these, too.
Small wave pattern:
WavePatternLampShadeS1.stl: with inside thin wall & without bottom support for lamp holder
WavePatternLampShadeS2.stl: with inside thin wall & with bottom support
WavePatternLampShadeS3.stl: without inside thin wall & without bottom support for lamp holder
Big wave pattern:
WavePatternLampShadeL1.stl: with inside thin wall & without bottom support for lamp holder
WavePatternLampShadeL2.stl: with inside thin wall & with bottom support
WavePatternLampShadeL3.stl: without inside thin wall & without bottom support for lamp holder
I only made ***2.stl. It might be difficult to print without inside thin wall.
Smaller resolution was used because there are many overhangs.
| WavePatternLampShadeL1.stl | 14.3MB | |
| WavePatternLampShadeL2.stl | 14.3MB | |
| WavePatternLampShadeL3.stl | 14.4MB | |
| WavePatternLampShadeS1.stl | 48.7MB | |
| WavePatternLampShadeS2.stl | 48.7MB | |
| WavePatternLampShadeS3.stl | 40.9MB |
