Wave Broken Meter Refill 3D Printer Model
The file 'Wave Broken Meter Refill 3D Printer Model' is (STL) file type, size is 3.8MB.
The file 'Wave Broken Meter Refill 3D Printer Model' is (STL) file type, size is 3.8MB.
Here i go for reparation stuff
I was pissed of to know that my broken decameter was going to the trash so i decided with the beginning meters to make a hull and make it working again.
SO my version is made with M4 Bolts and Screws to repair broken decameter.
Screws and bolts are fit to fix lateral parts that keep the entire decameter inside. They are used as spacers and for fixing the parts.
My objective with this at my work is to show that with reflexion lots of things can be recycle to the main use and as usefull as the original model.
This is in some sort a demonstration of the power of 3d printer in the way to recycle or repair things.
Update: You can print spacer and two special spacers for filling BMR* with rope >(D=2mm)
If you like it don't forget to drop a like or a comment or both ^^
If you have an idea i can evolve tell me it ;)
For Facebook posts:
https://www.facebook.com/WaveProduction-898263533576863/
I'm the original builder of this design : F*** you DMCA i have legit proof of anteriority and buildng of this.
| Base_Cylindrique.STL | 2.3MB | |
| Manivelle.STL | 223.8KB | |
| Partie_garde_latérale_17.STL | 3.3MB | |
| Partie_garde_latérale_moaaaar120.STL | 4.1MB | |
| Spacer_simple_x2_or_xXn.STL | 16.1KB | |
| Space_for_rope_x2_or_xXn.STL | 76.6KB |
