in the test video you can see that it pumps up about 200 liters of water in 70 seconds that is about 10000 liters a hour.
i used a 550 watt drill doing 1000 rpm, the shaft is a 50cm threaded rod m10
the outlet is 49 mm so you can glue on a 50mm, i used foam tape, it worked well
if you want to use a higher rpm it is better to choose a smaller impeller i put 4 diferend impellers in the dowload, for my drill i used the biggest one
this is a high volume low pressure pump so it can move a lot off water, but not verry high,
the amount of water you move, depends on what rpm your motor does and how many watts it can generate.
have a look at my other things for more pumps and other interesting things
if you use a hose you lose a lot of flow
| boormachine_steun.stl | 86.4KB | |
| boormachine_steun_2.stl | 50.9KB | |
| pomphuis.stl | 254.9KB | |
| pomphuis_deksel.stl | 142.1KB | |
| vuilkorf.stl | 160.0KB | |
| waaier_15mm.stl | 268.6KB | |
| waaier_20mm.stl | 267.8KB | |
| waaier_25mm.stl | 252.8KB | |
| waaier_30mm.stl | 252.0KB |
