Waterproof Beach Storage Tube 3D Printer Model
The file 'Waterproof Beach Storage Tube 3D Printer Model' is (stl) file type, size is 733.3KB.
The file 'Waterproof Beach Storage Tube 3D Printer Model' is (stl) file type, size is 733.3KB.
Hi,
this is a waterproof storage tube for your money or other things,
a nice gadget for beach, camping, prepper, or geocaching.
It is realy waterproof because of the o-ring.
You need a O-ring with a inner diameter of 31mm and thickness of 3,5 maybe a thickness
of 3mm would be easier to open and close the cap but i have dont test it.
!!IMPORTANT!! (fitting information)
I made the design wothout tolerances!
If you print it without scale it down the cap will not fit to the tube!
For the most printers a scale of 0,97 should be ok.
In Repetier Host you can scale induvidually for each axis.
So you should scale:
X : 0,97
Y: 0,97
Z: 1 >Don´t scale the Z axis!
If you scale the Z axis the pitch would be incorrect!
If the cap does not fit, dont worry.
scale the cap bigger or smaller and print only the cap again.
| Cap.stl | 1.2MB | |
| Tube.stl | 805.1KB |
