Watermeter – ESP32 – MicoUSB 3D Printer Model
The file 'Watermeter – ESP32 – MicoUSB 3D Printer Model' is (skp,stl) file type, size is 288.1KB.
The file 'Watermeter – ESP32 – MicoUSB 3D Printer Model' is (skp,stl) file type, size is 288.1KB.
Nice design by MakerMeik. I adjusted it a little because I wanted to connect the ESP32 with a USB socket. To do this I had to enlarge the case and create a new lid.
In my case, the glass on the water meter was extremely reflective, so I installed a lens on the camera light for this. I printed this lens out of transparent PLA to make the light more diffuse.
I also added a small reinforcement to the base body. The upper part can also be fastened with grub screws to avoid rotation.
You will need:
| watermeter.skp | 330.4KB | |
| watermeter1.stl | 345.5KB | |
| watermeter2.stl | 382.4KB | |
| watermeter3.stl | 108.8KB | |
| watermeter4.stl | 49.4KB | |
| watermeter5-lens.stl | 8.6KB | |
| watermeter6-lens.stl | 8.5KB |
