For watering house-plants.
The larger can is as big as will fit on my print table (225x155x170mm) and has a capacity of 1.7L (3 pints). The smaller can will contain 900ml (1.5 pints).
Use PLA for good layer and paint adhesion. After printing, it is best to spray-paint your can as it may leak slightly between the print layers.
| watering_can.stl | 549.9KB | |
| watering_can_rose.stl | 300.1KB | |
| watering_can_rose_small.stl | 300.1KB | |
| watering_can_small.stl | 549.9KB |
