Watering Bottle Nozzle Spout 3D Printer Model
The file 'Watering Bottle Nozzle Spout 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'Watering Bottle Nozzle Spout 3D Printer Model' is (stl) file type, size is 1.6MB.
This is a watering spout head designed to fit onto a standard drink bottle thread.
All of the watering bottle spouts i could find online had big holes and very small heads, meaning the water would come out very fast in a concentrated area, drowning seedling and throwing up soil.
This watering spout has a large 100mm head and tiny 1mm holes, this gives a thorough shower effect; the water comes out gently and covers a wide area. You'll also see that the holes are not run in parallel lines, the water leaves at an equal rate across the area of the head.
I used the thread from this design: https://www.thingiverse.com/thing:2693686
Everything else is designed from scratch.
I pushed the design to it's limit by printing with a 1.0mm printing nozzle and it held up perfectly, no leaking. Print yours with a smaller nozzle at a decent layer height and it will come out lovely! Some infill needed to reinforce the threaded area.
Happy gardening!
| Watering_can_Shower_bottle_spout.stl | 5.2MB |
