Water Point For Small Birds 3D Printer Model
The file 'Water Point For Small Birds 3D Printer Model' is (stl) file type, size is 429.9KB.
The file 'Water Point For Small Birds 3D Printer Model' is (stl) file type, size is 429.9KB.
Water point for small birds.
printed in PETG, the perch is held in place with M3 screws in melt-in threads.
the wall mount also uses M3 melt-in threads.
the bottle is a 500ml laboratory bottle with a 54mm thread.
It is important during assembly that the bottle has an inclination of 9°, >8° can work, >11° it overflows.
the angle of the wall bracket can be adjusted, so you can set the optimum angle yourself.
So that the print is waterproof, I print slowly with 40mm/sec. print with 5 top layers.
https://www.amazon.de/gp/product/B076H8PQ4Y/ref=ppx_yo_dt_b_asin_title_o05_s00?
update 17.07.2022:
I simplified the mount, the dovetail was too bad to use, now it's a simple hook.
I also adjusted the seat post again.
updtae 30.07.22:
I made a small change because I kept having problems with the water not flowing well.
Now it should work better and get by with less tilt.
| Vogeltraenke-adapter-2.stl | 346.3KB | |
| Vogeltraenke-adapter.stl | 94.4KB | |
| Vogeltraenke-body.stl | 483.0KB | |
| Vogeltraenke-seat.stl | 464.9KB |
![[SCAD] DiWhy Broomstick Spear / Javelin 3D Printer Model](https://res.3axis.co/4010277b-b142-4927-9bde-294f66c639d5/images/fa45b5ee-5eda-4e15-bead-283882686815_thumb.jpg)
