Water jet drive for bigger rc boats
The water jet is now updated. It is now possible to mount both steering servo and reverse servo.
If you alread have printed the main jet housing there is an upgradepart you can print and glue on to the housing to make it work with the new parts.
(The water jet is still work in progress so there is no guarantee that everything will work properly)
Leave a comment about future projects or improvents on the design
Update: For size reference the impeller is almost 100mm in diameter.
| housing.STEP | 2.2MB | |
| Housing_Ver_2.STL | 2.4MB | |
| impeller.STEP | 278.1KB | |
| impeller.STL | 10.6MB | |
| nossle.STEP | 425.7KB | |
| Nossle_Ver_2.STL | 1.5MB | |
| Reverse_Bucket_Ver_2.STL | 2.0MB | |
| Reverse_Servo_Mount.STL | 134.4KB | |
| servo_holder.STEP | 81.7KB | |
| servo_holder_revers.STEP | 149.1KB | |
| skopa.STEP | 300.8KB | |
| steering.STEP | 221.4KB | |
| Steering_Bend.STL | 75.9KB | |
| Steering_Extention.STL | 53.4KB | |
| Steering_Nossle_Ver_2.STL | 2.4MB | |
| Steering_Servo_Mount.STL | 102.4KB | |
| Upgrade_Part_housing.STL | 63.5KB |
