barrel.stl: Water cask meant to sit on chocks on it's side; hollow with a drain hole in bottom and vent on side (bung included), to save resin and weight.
Cask.stl: Same barrel without chocks
Cask_solid.stl: Same barrel, but solid, not hollow, no holes or bungs.
This originally was made for a 1:20 scale model boat, with 3mm walls, but can be sized down to a point, maybe 1:32 before the walls are too thin to print.
| barrel.stl | 477.3KB | |
| Cask.stl | 569.1KB | |
| Cask_solid.stl | 315.9KB |
