Warhammer 40k Boltun SuperSoaker Scatterblast Mod 3D Printer Model
The file 'Warhammer 40k Boltun SuperSoaker Scatterblast Mod 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'Warhammer 40k Boltun SuperSoaker Scatterblast Mod 3D Printer Model' is (stl) file type, size is 2.7MB.
This is a mod turning your SuperSoaker Scatterblast water pistol in a fullblown Warhammer 40k imperial Boltgun, of course retaining the waterpistol useability!
I 3D-scanned the SuperSoaker for a basis. Then I built the boltgun part from scratch in Blender, and carved the SuperSoaker-scan via bolean function from the model. Then I optimized the model for printing by reducing material further.
I printed it in 100% size with PLA on a Bambu Lab X1 printer. Some parts needed a little rework to fit, but mostly it was a straigtforward build. You need to widen some holes in the original SuperSoaker ABS case to screw the 3D-print onto it. You require a couple of 50mm to 70mm screws with a diameter of about 3-4mm to keep everything together. I reused 2 screws from the original pumpaction grip to screw the new grip together.
Acknowledgements: The Imperial Aquila was originally made by gokoen and can be found here: https://www.thingiverse.com/thing:1083942
The magazine was also made from someone here at thingiverse (I think), but I sadly can't find the source any longer! If someone can help me identify it, please drop me a note, so I can add the original creator here!
| Gun_back_left.stl | 921.7KB | |
| Gun_back_right.stl | 498.3KB | |
| Gun_front_left.stl | 684.8KB | |
| Gun_front_right.stl | 863.4KB | |
| Gun_middle_left.stl | 688.7KB | |
| Gun_middle_right.stl | 743.0KB | |
| Magazine_left.stl | 963.2KB | |
| Magazine_right.stl | 955.6KB | |
| PumpactionGrip_left.stl | 553.6KB | |
| PumpactionGrip_right.stl | 569.0KB |
