A fully articulated Ember Warframe.
Scale parts to 200% for a 6 inch figure. 375% for a 12 inch figure.
Suggest 100% infill for the Joints.
If your joints are too tough to insert, sand around the spheres a bit.
| Ember_grataka.stl | 345.0KB | |
| Head.stl | 111.8KB | |
| Head2.stl | 142.1KB | |
| Head3.stl | 345.3KB | |
| Joints.stl | 1.3MB | |
| LeftArm.stl | 102.1KB | |
| LeftFoot.stl | 68.0KB | |
| LeftHand.stl | 73.0KB | |
| LeftHip.stl | 140.3KB | |
| LeftLeg.stl | 104.5KB | |
| LeftShoulder.stl | 113.8KB | |
| LowerBody.stl | 258.6KB | |
| RightArm.stl | 102.1KB | |
| RightFoot.stl | 68.0KB | |
| RightHand.stl | 73.0KB | |
| RightHip.stl | 140.3KB | |
| RightLeg.stl | 104.5KB | |
| RightShoulder.stl | 113.8KB | |
| UpperBody.stl | 277.4KB |
