Wardrawer For Gridfinity 3D Printer Model
The file 'Wardrawer For Gridfinity 3D Printer Model' is (fpp,stl) file type, size is 615.3KB.
The file 'Wardrawer For Gridfinity 3D Printer Model' is (fpp,stl) file type, size is 615.3KB.
Wardrawer is set of stackable cases for gridfinity baseplates. It is intended for use with my Warhammer gridfinity magnetic plates.
To assemble: Print out gridfinity baseplates with connection holes. Attach standard pinewood derby wheels to the gridfinity plates to function as drawer rollers. Roll the plate into the wardrawer.
The stacking can be done by gluing in Ikea-sized wooden dowels to lock the segments into place. To seal the front, I recommend cutting an appropriately sized piece of polystyrene to slide into the notch in the front.
There are also screw holes all over it if you wish to stack them sideways or nail them to a board or something.
Use at your own risk, I'm not responsible for anything that happens to your models or any other piece you use this with :)
This is a work in progress. I intend to make these smaller and easier to print.
| Wardrawer_40mm.fpp | 567.7KB | |
| Wardrawer_40mm.stl | 851.6KB | |
| Wardrawer_60mm.stl | 1.3MB | |
| Wardrawer_80mm.stl | 850.5KB |
