Wanhao Di3 Camera Mount + 2020 Mount 3D Printer Model
The file 'Wanhao Di3 Camera Mount + 2020 Mount 3D Printer Model' is (stl,STL) file type, size is 5.5MB.
The file 'Wanhao Di3 Camera Mount + 2020 Mount 3D Printer Model' is (stl,STL) file type, size is 5.5MB.
Update 3/20/17:
I've added an arm and case for the Pi Cam. Requires an M3 bolt and nut. The design I remixed from didn't state the length of the M3 bolt and I don't have a Pi Cam to test it out with. I have not printed the arm and case to test it, but as its a remix of a couple existing designs, I don't suspect there will be problems. Let me know if there are.
Update 11/21: I just uploaded a time-lapse video - https://youtu.be/3JDzyx4wJxg
Also updated the 2020 mount so that it requires 2 bolts and nuts.
This camera mount is basically an articulating arm with 2 separate frame mounts. One for the Wanhao Duplicator i3 (it mounts to the front frame) and one for a 2020 extrusion.
Mix and match as many short arms, long arms, and 90 degree arms as you want to position the camera however you want.
There is a standard 1/4" screw mount for the camera and one for the Logitech C270.
This is a mashup of several different things to get a design that works for me with my Wanhao Di3 and my Delta.
If you want to mount it to the Di3 w/ a Logitech C270... you will need to print at least:
If you want to use a camera with a standard 1/4" tripod screw... then add:
If you want to mount onto a 2020 extrusion, then replace the frame mount with the 2020 mount.
And if you need to change the orientation of the camera... then you can insert a 90 degree arm.
| hinge_c270_mount.stl | 21.2KB | |
| hinge_camera_mount_quarterinch.stl | 88.9KB | |
| raspberri_pi_camera_case_back_v0.4.STL | 3.7MB | |
| raspberri_pi_camera_case_front_m3_bot_v0.4.2.STL | 5.1MB | |
| raspberri_pi_camera_case_front_m3_top_v0.4.2.STL | 5.1MB | |
| tripod_2020_mount.stl | 68.1KB | |
| tripod_arms.stl | 48.7KB | |
| tripod_arm_90.stl | 23.7KB | |
| tripod_arm_long.stl | 24.1KB | |
| tripod_frame_mount.stl | 437.2KB | |
| tripod_nob.stl | 46.6KB | |
| tripod_pi_cam_mount.stl | 79.1KB | |
| tripod_top.stl | 29.0KB |
