Wallis And Steevens Advance 3D Printer Model
The file 'Wallis And Steevens Advance 3D Printer Model' is (stl) file type, size is 128.9KB.
The file 'Wallis And Steevens Advance 3D Printer Model' is (stl) file type, size is 128.9KB.
This is a 1:72 scale model of a 1926 wallis and steevens advance steam roller, it has been designed to be printed on a resin printer and I haven't tried it on a filament. it has two variants ne with a reg plate on the front forks and one without. I have uploaded only one copy of each roll because they are identical and can jut be printed twice. if there are any problems you encounter just let me know and ill do my best to fix it as soon as possible
| wallis_and_steevens_advance_front_forks.stl | 46.0KB | |
| wallis_and_steevens_advance_front_forks_w_reg_plate.stl | 46.6KB | |
| wallis_and_steevens_advance_front_pin.stl | 9.1KB | |
| wallis_and_steevens_advance_front_roll.stl | 86.8KB | |
| wallis_and_steevens_advance_main_body.stl | 364.4KB | |
| wallis_and_steevens_advance_rear_roll.stl | 91.1KB | |
| wallis_and_steevens_advance_roof.stl | 13.9KB | |
| wallis_and_steevens_advance_stearing_rack.stl | 12.5KB |
