Wallet Phone Stand 3D Printer Model
The file 'Wallet Phone Stand 3D Printer Model' is (stl) file type, size is 27.8KB.
The file 'Wallet Phone Stand 3D Printer Model' is (stl) file type, size is 27.8KB.
I made a printable version of this sleek phone stand. It is the same size as your typical credit card so it will fit in your wallet on the go. I find it useful for long trips. Printed with all solid infill due to the thickness of the object. PETG was used for its strength and flexibility on the living hinges. I would assume PLA would snap after a few uses.
You will need to have your printer calibrated with a dialed in profile for PETG to get a good print. If there is an elephant foot on your first layers it will be difficult to get all the cutouts free to move.
You could also scale down the z-height of this model to get it to print faster. It is a bit thicker than the typical credit card, but I decided it was better for strength. If you try it at 1.2mm let me know... good luck.
Updated: Some of the spots were widened
| Card_Phone_Stand.stl | 153.2KB |
