I designed and printed it for my daughter.
It can be printed in blue or any other color for boys as well.
I used a led lamp (AC 220V G4 2508) for lightning at the attached link below.
The important trick is;
While printing the big part (wall lamp body open window) start with the first color, 2mm later shift the other color.
For the picture attached, I started with pink, then shift to white.
Just very easy to fit parts together and install it wall. Just print them all install with screw or glue. For the screw option, you need 4x 2mm tiny screws. For wall mount, you need 3cm long wall screws.
https://www.aliexpress.com/ite...
If you want to make it remote controled just like me, then you need to use below parts and an 12V led lamp.
| wall_lamp_body_open_window.stl | 1.2MB | |
| wall_lamp_mount_1.stl | 46.0KB | |
| wall_lamp_mount_2.stl | 378.7KB | |
| wall_lamp_pin1.stl | 1.3KB | |
| wall_lamp_pin2.stl | 1.3KB | |
| wall_lamp_rod.stl | 78.0KB | |
| wall_lamp_wheel.stl | 93.3KB |
