Made one of those wall planters with a removable drip tray because all of them are paid. I haven't done a test print yet. Feel free to let me know if there's anything that needs to be adjusted.
Update:
I've completed a test print at 50% scale. The tolerances worked perfectly with PETG. I've added to the wall mount to make it easier to slide it on and off of the mount while attached to the wall.
| Planter_Body_v4.stl | 395.8KB | |
| Planter_Bottom_v4.stl | 99.2KB | |
| Wall_mount_v3.stl | 26.4KB |
