Wall Mounted Screwdriver Holders 3D Printer Model
The file 'Wall Mounted Screwdriver Holders 3D Printer Model' is (stl) file type, size is 3.8MB.
The file 'Wall Mounted Screwdriver Holders 3D Printer Model' is (stl) file type, size is 3.8MB.
Wall mounted holders for seven piece screwdriver sets. The mounting plate has holes that align with standard 1" pegboard. In the pictures, I've mounted the holders to cabinet doors using removable 3M adhesive strips ("3M Command Hanging Strips").
I've included three.step files, the first one has seven identically sized funnels, the second version has the left most funnel widened to accept the largest flat bladed screwdriver in my set, and the third has two larger holes (one at each end) when needed.
I printed them in PLA with the back mounting plate oriented toward the printer bed. This results in a slight z-seam on the inside of each funnel which I sanded down. Perhaps there are better print orientations.
| ScrewDriverHolder.stl | 3.3MB | |
| ScrewDriverHolder_1LargerHole.stl | 4.0MB | |
| ScrewdriverHolder_2LargeHoles.stl | 4.2MB |
