These are some slide together honeycomb shelf units I designed in fusion360 after getting the idea from a few others but not quite liking them exactly.
The units consist of:
6 sided slide together mounting base with 5 holes for screws
6 sided slide together support base with 2 holes for screws (generally used on the edges of mounted area for added support)
6 sided slide together plain body
2 sided slide together pain body
3 sided slide together plain body
3 sided slide together outer support base with 2 holes for screws
also the files include 70% scales of this version.
at 100 and 70% scales the walls are set to be 3.2mm width which is perfect for the use of a 0.8mm nozzle and 2 layer thick inner and outer walls for optimal print times.
I have scaled down the slide together bits to help optimize print times and eliminate needless use of material.
UPDATE:
Added shelf bodies to slide in the center to help optimize space used inside the honeycomb. you can just print it flat and slide it strait into the honeycomb.
I also added in a 6 and 3 sided 70% scale outer support bodies.
If you have any issues or requests feel free to drop a comment and I'll see what I can do.
| Center_support.stl | 69.6KB | |
| Edge_body.stl | 11.0KB | |
| Edge_body_2.stl | 14.9KB | |
| Outer_support.stl | 49.7KB | |
| Outer_support_2.stl | 36.8KB | |
| Plain_body.stl | 28.2KB | |
| Shelf_Body.stl | 1.1KB | |
| Small_Center_support.stl | 70.6KB | |
| Small_Edge_body.stl | 11.0KB | |
| Small_Plain_Body.stl | 28.2KB | |
| Small_plain_body_3_sides.stl | 14.9KB | |
| Small_Shelf_body.stl | 1.1KB | |
| Small_support_body.stl | 50.9KB | |
| Small_support_body_half.stl | 38.2KB | |
| Small_Test.stl | 28.2KB | |
| Test.stl | 28.2KB |
