This is the v2 updated version! (Old version: thing:6591051)
I learned how to use OnShape and wanted to redo this design as I quite like it.
I couldn't find a helmet holder that wasn't bulky or one that didn't put pressure on the foam that touches the neck and didn't want that foam to flatten so I designed my own.
I designed this holder to put the pressure just above neck foam as that part doesn't touch your head so it shouldn't matter if that foam flattens eventually.
Living in a rented unit I also designed it to use two large Command strips to be make it removable.
I have also made a version with 2 screw holes but this one is untested, would be happy to hear anyone's results if they print this.
Designed to print without supports. It printed fine on my Ender 3 v2 which usually gives poor results.
| Helmet_Holder_3m.stl | 5.1MB | |
| Helmet_Holder_screw_in.stl | 5.3MB |
