Wall Mounted Guitar Holder 3D Printer Model
The file 'Wall Mounted Guitar Holder 3D Printer Model' is (stl) file type, size is 93.1KB.
The file 'Wall Mounted Guitar Holder 3D Printer Model' is (stl) file type, size is 93.1KB.
This is my take on a wall mounted guitar holder. It has slots for storing up to three Picks.
Created with Fusion 360. STL file included.
Recommended printing position is visible in the pictures. Standard wood screws (Ø = 5mm) can be used, but don't tighten them too much. The depicted guitar neck is 50 mm wide.
Material used: PLA, brand: Geeetech
Layer Height: 0.2mm
Infill: 20%
Support: yes, with support blocker
| Guitar_Holder.stl | 285.2KB |
