Wall-Mounted Display Case (Thermostat) – Ili9341 3D Printer Model
The file 'Wall-Mounted Display Case (Thermostat) – Ili9341 3D Printer Model' is (stl) file type, size is 207.6KB.
The file 'Wall-Mounted Display Case (Thermostat) – Ili9341 3D Printer Model' is (stl) file type, size is 207.6KB.
I built a case to house an ili9341 3.2" display as well as accommodate air slots for temperature and light sensors as well as have space behind to attach to a standard single-gang outlet box to allow for wiring and storage of esp32 devices.
For more info on how to make this using esphome: https://community.home-assistant.io/t/work-in-progress-esphome-thermostat/694436
Amazon Links
Display: https://a.co/d/2QVZ1FT
Temp Sensor: https://amz.run/9F14
Light Sensor: https://amz.run/9F19
1-gang outlet box: https://a.co/d/enQQQ1w
esp32 device: https://a.co/d/8g4CPCv
Edit: Updated the lid guiding rods to be slightly narrower for easier insertion.
| Round_Thermostat_Base.stl | 647.8KB | |
| Round_Thermostat_Lid.stl | 97.7KB |
