Just a wall mount for a M10 sisal scratching pole for my cat.
It's good for building a climbing wall for your cat :)
I used a pole from a cheap cat tree. But any M10 sisal pole should fit.
I put a locknut into the cutout on the bottom to prevent the sisal roll getting loose.
My sisal pole is 85mm in diameter.
I printed the cover in wood PLA and the wall mount in black PETG with 35% infill.
My cat weigths about 6 Kilogramms and the wall survives jumps on it.
| cover.stl | 24.9KB | |
| wall_mount.stl | 84.0KB |
