Wall Mount Cell Phone Holder 3D Printer Model
The file 'Wall Mount Cell Phone Holder 3D Printer Model' is (stl) file type, size is 6.8KB.
The file 'Wall Mount Cell Phone Holder 3D Printer Model' is (stl) file type, size is 6.8KB.
I made this small shelf to hold most modern size cell phones, it hold my iPhone 6 in a lifeproof fre power case with a little room to spare. Screw holes are countersinked and sized to hold a standard course drywall screw flush with the plate. This ended up being incredibly sturdy, I printed it with a 15% infill, .2mm layers, with three layer top and bottom, and 2 layer sides, with PLA and i couldn't break or bend the shelf at all even putting almost my full weight on it. Probably a little overkill, but it does the job nicely.
I had no problems with the very long bridges required to print the lip on the top of the print, I did have to cut out a few strands of PLA that were a touch droopy but you can't see them once its mounted as it faces the wall.
Printed on a replicator 2 using inland PLA, and simplify 3D 3.0 as a slicer.
If your phone is larger than 3.5"x 6.5" feel free to modify the design to fit.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/crbw1xKemXt
| brian_phone_holder.stl | 31.5KB |
