Wall Mount Bracket For Harbor Freight “Portable Storage Case” 3D Printer Model Free Download

3D Printer Models

Wall Mount Bracket For Harbor Freight “Portable Storage Case” 3D Printer Model

Author: @Electrical_Imposter

License: CC BY-NC-SA

File formats: STL

Download type: zip

Size:904.2KB

The file 'Wall Mount Bracket For Harbor Freight “Portable Storage Case” 3D Printer Model' is (STL) file type, size is 904.2KB.

Description Files (2)

Summary

This is a wall mount bracket to hold these Harbor Freight "Portable Storage Cases" (item# 95807). The bracket has a slight downward angle so you can see inside a bit easier. These were designed so that each case could easily be lifted out and taken to a work area.

Mounting tips:

I used a drywall anchor to mount each bracket to the wall. This works, subject to the usual annoyances and limitations of drywall anchors.
Update: After ~2 years the drywall anchors I used are starting to loosen up. If I did it again, I would mount some 1x3's into the studs, and then screw these brackets into those.
Space the brackets 22cm (on center)
If mounting multiple cases vertically like I did, I recommend spacing them 15cm to ensure you have enough room to remove them without hitting the bracket above.

The "revised" STL incorporates some changes I made after printing the initial batch. Mainly the the screw hole is a bit smaller (since I changed what type of drywall anchors I used).

HF-Toolbox-Bracket.STL	981.6KB
HF-Toolbox-Bracket_Revised.STL	1.2MB

Wall Mount Bracket For Harbor Freight “Portable Storage Case” 3D Printer Model

Summary

Tags

You might also like