WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3D Printer Model
The file 'WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3D Printer Model' is (pdf,STL) file type, size is 10.0MB.
The file 'WALL-E BnL Cooler Kit (No Support, No AMS, No Glue) 3D Printer Model' is (pdf,STL) file type, size is 10.0MB.
WALL-E can't go anywhere without his cooler! And you can't store anything without this functional display either ;) This kit is roughly 6 inches (14cm) wide and 5 inches (12cm) tall. This hooks onto the back of our WALL-E kit: https://thangs.com/designer/The%20Kit%20Kiln/3d-model/WALL-E%20Kit%20%28No%20Support%2C%20No%20AMS%2C%20No%20Glue%29-1129563
As with all of our models, this prints with no supports, assembles with no glue, and doesn't require a multi-material 3D printer! Assembly instructions are included in the download with the files, and the print settings are listed in the photos above ^
I used the following filaments:
Hatchbox True Red
Polymaker Polyterra Cotton White
Hatchbox Matte Navy
Come join our growing discord server of over 1000 members: https://discord.gg/vMKRxGFbwg
Find all of my exclusive content on my Thangs.com profile: https://thangs.com/designer/The%20Kit%20Kiln
| BnL_Cooler_Instructions.pdf | 5.7MB | |
| Plate_1_-_Red.STL | 3.2MB | |
| Plate_2_-_White.STL | 5.6MB | |
| Plate_3_-_Blue.STL | 1.2MB |
