This is a copycat design i took from google stockfotos, not my own design. With incscape I copied the design into Fusion360 and split the design into pieces that my printer could handle. I added a connector for easy alignment and easy glue together. The wallmount should give 10 mm of clearance to to wall, i simply used tesa powerstrips, so no holes to be drilled. I did not like the final finish so i added 3 layers of clear black spraypaint.
Print:
| getnaked.svg | 7.1KB | |
| getnaked_connector.stl | 684.0B | |
| getnaked_D.stl | 81.3KB | |
| getnaked_E.stl | 50.3KB | |
| getnaked_ET.stl | 74.3KB | |
| getnaked_G.stl | 104.2KB | |
| getnaked_K.stl | 72.9KB | |
| getnaked_NA.stl | 102.0KB | |
| getnaked_T.stl | 81.3KB | |
| getnaked_wallmount.stl | 5.4KB |
