Wall Cord Pass Through 3D Printer Model
The file 'Wall Cord Pass Through 3D Printer Model' is (stl) file type, size is 4.9MB.
The file 'Wall Cord Pass Through 3D Printer Model' is (stl) file type, size is 4.9MB.
We have a portable generator in case the power goes out for an extended period, like a rolling blackout. Running a cord in through a door, leaves the door open a crack and it is unsecured. Same thing with the cord through a window. So I decided I needed a passage through the wall which would accommodate two 12 Ga, 20 Amp extension cords. One for the refrigerator and another for whatever. I also wanted these access holes to be firmly sealable to keep out creepy crawlers like we have in Texas. Don't needy more scorpions or geckos in the house.
I looked online and they do make wall pass throughs for this use that will accommodate the thickness of my walls (5 ½"), but they were in excess of $25 and had no way of closing them off when not in use, unless you stuffed a rag into the opening. Not too appealing and critters can chew through rags.
| Passthrough_Plug_1__2_Cord.stl | 255.6KB | |
| Wall_Passthrough_012_Cord_Plug.stl | 381.6KB | |
| Wall_Passthrough_0_Cord_Plug.stl | 344.3KB | |
| Wall_Passthrough_1_Cord_Plug.stl | 343.3KB | |
| Wall_Passthrough_2_Cord_Plug.stl | 340.8KB | |
| Wall_Passthrough_Barrels.stl | 2.8MB | |
| Wall_Passthrough_Complete.stl | 3.4MB | |
| Wall_Passthrough_Female.stl | 2.1MB | |
| Wall_Passthrough_Female__Plug.stl | 2.4MB | |
| Wall_Passthrough_Male.stl | 722.5KB | |
| Wall_Passthrough_Male__Plug.stl | 1.0MB |
