Wall Clock (Ø 500mm) 3D Printer Model
The file 'Wall Clock (Ø 500mm) 3D Printer Model' is (stl) file type, size is 549.0KB.
The file 'Wall Clock (Ø 500mm) 3D Printer Model' is (stl) file type, size is 549.0KB.
This is a basic wall clock.
You need:
1x Clock movement
(I used this one: https://www.amazon.it/Hicarer-Torsione-Meccanismo-Movimento-Orologio/dp/B078W5ZF9S/ref=sr_1_37?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1ZCTVP6AQFE1Y&keywords=hicarer+orologio&qid=1578223302&sprefix=hicare%2Caps%2C170&sr=8-37)
24x Countersunk M3x15mm screws + nuts
8x M3x25mm screws + nuts
Also consider donations if you like the design!
It would be really appreciated.
| 11.stl | 145.9KB | |
| 12.stl | 149.7KB | |
| 2.stl | 144.5KB | |
| 3.stl | 150.2KB | |
| 5.stl | 152.4KB | |
| 6.stl | 148.6KB | |
| 8.stl | 149.9KB | |
| 9.stl | 148.6KB | |
| Back_ring_x4.stl | 80.9KB | |
| Central_piece.stl | 223.7KB | |
| Front_ring_x4.stl | 107.5KB | |
| Gears.stl | 355.7KB | |
| Inner_structure_x4.stl | 268.1KB | |
| Insert_x4.stl | 67.4KB |
