Wake me up !
A 3D-printable wakeboard come in ~200x200 mm 18 printable parts, ready to be glued & assembled.
This projet is inspired by this one : https://grabcad.com/library/wakeboard-1
=> 3D parametric files of the original wakeboard can be found there.
I basicly hollowed the board with isogrids
Note that there is a space left in the middle stringer to be filled with carbon/glass fiber in order to add stiffness. Small holes have also been located for straps setup as well.
If you want to know more on isogrids, check https://en.wikipedia.org/wiki/Isogrid
| Wakeboard_-_1R-1.STL | 6.7MB | |
| Wakeboard_-_2R-1.STL | 4.3MB | |
| Wakeboard_-_3R-1.STL | 4.0MB | |
| Wakeboard_-_4R-1.STL | 3.9MB | |
| Wakeboard_-_5R-1.STL | 4.3MB | |
| Wakeboard_-_6R-1.STL | 4.0MB | |
| Wakeboard_-_7R-1.STL | 4.1MB | |
| Wakeboard_-_8R-1.STL | 4.2MB | |
| Wakeboard_-_9R-1.STL | 5.6MB | |
| Wakeboard_-_Symétrie1R-2.STL | 6.7MB | |
| Wakeboard_-_Symétrie2R-2.STL | 4.3MB | |
| Wakeboard_-_Symétrie3R-2.STL | 4.0MB | |
| Wakeboard_-_Symétrie4R-2.STL | 3.9MB | |
| Wakeboard_-_Symétrie5R-2.STL | 4.3MB | |
| Wakeboard_-_Symétrie6R-2.STL | 4.0MB | |
| Wakeboard_-_Symétrie7R-2.STL | 4.1MB | |
| Wakeboard_-_Symétrie8R-2.STL | 4.2MB | |
| Wakeboard_-_Symétrie9R-2.STL | 5.6MB | |
| Wakeboard_Droit_-_gauche.STEP | 29.4MB | |
| Wakeboard_PARAMETRIC.STEP | 29.4MB |
