Wago 221 Din 35 Rail Mount 3D Printer Model
The file 'Wago 221 Din 35 Rail Mount 3D Printer Model' is (skp,stl) file type, size is 567.1KB.
The file 'Wago 221 Din 35 Rail Mount 3D Printer Model' is (skp,stl) file type, size is 567.1KB.
This is a system for mounting Wago 221 series connectors to a DIN35 rail.
Supports:
221-412, 221-413, 221-415
221-612, 221-613, 221-615
The system is modular, but not cross size compatible. So you can put a 412, a 413 and a 415 on a single rail clip, you can put a 415 and 615 on one.
You need a rail clip either the 41X or the 61X depending on your connectors and at least one compatible mount.
an X12 will fit into a X13 and X15 as well as would a X13 fit into an X15 but not vice versa.
You could always just print X15 and put any connectors to it.
I just thought of adding the smaller ones for labeling "maybe?"
I needed some connectors for my Voron build and decided to go with Wago, but I still wanted to rail mount them.
I used the rail clip mechanism from thing:3188822 - Sonoff DIN 35 Mount by Blade893_uk
But I edited it to suit this case.
The mounts require unfortunately supports everywhere.
| wago.skp | 1.6MB | |
| wago_221-412-mount.stl | 16.2KB | |
| wago_221-413-mount.stl | 17.1KB | |
| wago_221-415-mount.stl | 13.9KB | |
| wago_221-41X-rail-clip-V2.stl | 60.2KB | |
| wago_221-41X-rail-clip.stl | 60.2KB | |
| wago_221-612-mount.stl | 15.7KB | |
| wago_221-613-mount.stl | 16.5KB | |
| wago_221-615-mount.stl | 13.6KB | |
| wago_221-61X-rail-clip-V2.stl | 59.2KB | |
| wago_221-61X-rail-clip.stl | 59.2KB |
