Wacoal Kurokawa Building… N-scale 3D Printer Model
The file 'Wacoal Kurokawa Building… N-scale 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Wacoal Kurokawa Building… N-scale 3D Printer Model' is (stl) file type, size is 1.2MB.
My most ambition attempt so far.. The Wacoal Building designed by Kisho Kurokawa.
https://www.pinterest.com.au/pin/495396027740975163/
A major print, even on the K1. I split the body into two parts.
You may need to cut the ends in half horizontally to fit them on smaller printers.
The air-con units for the roof are best printed in two halves.
The roof requires supports all the way along
Windows are all best printed in transparent with 100% fill, and with a raft (except the flat sloped ones at the front)
Body has printed well, but I still have a few of the smaller parts to go
NOTE: main windows fitted into the body well, but I had to experiment with the small windows and frames at the bottom front.. and can't find the size I ended up printing them..
You may need to do a couple of prints to get those windows correct size, sorry.
| Wacoal_Air_Con-cut-1.stl | 1.1MB | |
| Wacoal_Air_Con.stl | 929.0KB | |
| Wacoal_back_door_1-3.stl | 6.5KB | |
| Wacoal_back_door_R.stl | 6.5KB | |
| Wacoal_Body-lower.stl | 329.1KB | |
| Wacoal_Body-top.stl | 311.3KB | |
| Wacoal_Body.stl | 504.8KB | |
| Wacoal_Building_19.stl | 1.6KB | |
| Wacoal_garage_ent_door.stl | 49.6KB | |
| Wacoal_garage_pillar.stl | 12.4KB | |
| Wacoal_glass_1-4.stl | 684.0B | |
| Wacoal_glass_1.stl | 137.1KB | |
| Wacoal_glass_2.stl | 62.4KB | |
| Wacoal_glass_front_sloped_x5.stl | 76.1KB | |
| Wacoal_glass_lens_x13.stl | 12.4KB | |
| Wacoal_glass_lower_5.stl | 684.0B | |
| Wacoal_glass_x25.stl | 82.3KB | |
| Wacoal_left_body.stl | 189.6KB | |
| Wacoal_light.stl | 144.5KB | |
| Wacoal_loer_frame_5.stl | 5.2KB | |
| Wacoal_lower_frame_14.stl | 1.6KB | |
| Wacoal_lower_frame_2.stl | 3.4KB | |
| Wacoal_lower_frame_3.stl | 4.6KB | |
| Wacoal_rear_sloped.stl | 884.0B | |
| Wacoal_Right_body.stl | 169.2KB | |
| Wacoal_roof.stl | 155.8KB |
