My original parts broke so I decided to copy it.
Please note that you will have to use your old spring.
In order to attach the "grip" to the "front" you will also need some pins (I used 2,5 mm diameter metal pins). Depending on your printer you should drill the holes again after printing.
I suggest using ABS material for this print, so that you can use some acetone to improve surface finish.
The parts are fully compatible with the original ones. So in case any of your original parts broke you can replace it with one part out of this package (see example pictures).
| Counterpart_V01.STL |
| Front_V01.STL |
| Grip_V01.STL |
| Pin_V01.STL |
| Snapper_V01.STL |
