My trunk handle was broken so I decided to make my own trunk handle for VW Passat B5.5 wagon, but its possible it will fit other similar vehicles..
Trunk handle is just a regualr electrical switch, so along with printed parts you will need a switch and camera.
Switch that I used (any flat switch with 12mm hole diameter will work, self reset switch/momentary):
https://www.aliexpress.com/item/4000034288190.html?spm=a2g0o.productlist.main.29.53172zRh2zRhSO&algo_pvid=f097d7d3-3ee2-4c61-8730-bf9ed9e2a8be&algo_exp_id=f097d7d3-3ee2-4c61-8730-bf9ed9e2a8be-14&pdp_npi=4%40dis%21EUR%211.84%210.83%21%21%2113.90%216.25%21%4021039a5b17309944641193754ee549%2112000032241254921%21sea%21HR%212304005810%21X&curPageLogUid=8dcrIGAOdX29&utparam-url=scene%3Asearch%7Cquery_from%3A
Camera that I used: https://www.aliexpress.com/item/32667042388.html?spm=a2g0o.order_list.order_list_main.46.582f1802X2O0x5
To install fixing bracket you will also need M4x30 screws.
Printed it with 80% infill, and been using it for a month now without issues.
| Passat_B5.5_wagon_-_trunk_handle_with_camera_-_part_1.stl | 9.5KB | |
| Passat_B5.5_wagon_-_trunk_handle_with_camera_-_part_2.stl | 410.5KB | |
| Passat_B5.5_wagon_-_trunk_handle_with_camera_-_part_3.stl | 5.2KB |
