VRX For MFD Mini Crossbow 3D Printer Model
The file 'VRX For MFD Mini Crossbow 3D Printer Model' is (stl) file type, size is 60.0KB.
The file 'VRX For MFD Mini Crossbow 3D Printer Model' is (stl) file type, size is 60.0KB.
What you need to bay
Manual: https://docs.google.com/document/d/1sDpdV6Gssm-bEyC1ZykTByyqFHpi3Hca-2Ytvc0dSTQ
Material that you need:
Nuts and screw 1/4
2x https://es.aliexpress.com/item/1005004972149255.html (Model S04)
2x https://es.aliexpress.com/item/1005005993719645.html
2x screw M3
2x nut
8x nylon screw M3
8x nylon nut
1x strap
2x SMA cable SMA to RP-SMA (20cm) https://es.aliexpress.com/item/1005005021528759.html
Demo:
https://www.youtube.com/watch?v=gTRrwgNki_I
Print instructions:
The parts that need support:
VRX Tripod Holder v0.2.stl
WS VRX Holder v0.2.stl
Instructions:
MFD att holder.stl
MFD att holder.stl install in the tracker. This part
You should install a ¼ nut in the part, in the middle hole.
Example and result:
WS VRX Holder v0.2.stl
Install the ¼ nut on both sides, in the big hole in the middle.
Result:
| MFD_att_holder.stl | 35.6KB | |
| Tripe_Feed_Array_Support.stl | 89.2KB | |
| VRX_Tripod_Holder_v0.2.stl | 30.2KB | |
| WS_VRX_Holder_v0.2.stl | 96.0KB |
