RECOMMENDED PRINT: (I used an out of the box ender 3, so it should print for most.)
Layer Height: 0.12mm (Super quality in your slicer program, I use cura.)
Nozzle Diam: 0.4mm
Supports: YES (Use your slicers auto generated supports. It only adds about 15-20 min)
USE A RAFT/Floor for your print to keep the first few layers from messing up.
I used the raft setting in cura.
This is basically a dual layered 3d voronoi sphere I made in blender. I am working on some ideas around it. This one prints well and is surprisingly tough, i would imagine most average people would have a hard time crushing it between two fingers.
Let me know what you think! Support me with downloads and comments for more work! I want to supply a large list of cool things for people!
If you are unfamiliar, you can google Voronoi for other cool math sculptures.
| Voronoi_Sphere.stl | 84.4MB |
