Original OEM gauge bezels are getting harder and more expensive to find. these will accept 52mm gauges and when using the back ring(file included) it does not require the OEM gauge mounts so this print replaces both the front bezel and the rear mount.
I used a clear PETG. Post processing included sanding(320 grit), bondo, primer, SEM black trim paint.
For single or double bezel, print PETG standing up for strength in clips.
For triple bezel, print PETG face down against bed.
Tree supports worked well for me.
Back ring is used to slip on the back of gauge that doesn't have a twist on ring for securing in place, the file makes a 51mm ring printed with TPU to be snug on a 52mm gauge. Scale if too large or small.
| volvo240_gaugebezel.stl | 853.0KB | |
| volvo240_gaugebezelbackring.stl | 91.5KB | |
| volvo240_gaugebezel_double.stl | 1.7MB | |
| volvo240_gaugebezel_triple.stl | 2.7MB |
