VOID40 – A 40% Ortholinear Keyboard 3D Printer Model
The file 'VOID40 – A 40% Ortholinear Keyboard 3D Printer Model' is (step,stl) file type, size is 692.1KB.
The file 'VOID40 – A 40% Ortholinear Keyboard 3D Printer Model' is (step,stl) file type, size is 692.1KB.
The VOID40 is a 3d printed, handwired, 40% ortholinear keyboard running QMK Firmware on a Pro Micro controller.
The case is designed to fit the bed of a stock Ender 3 when the parts are rotated 45 degrees and the skirt/brim is disabled in the slicers settings.
2 versions for the top case are included, MIT and full grid.
4 x M3x10 countersunk screws for the plate
4 x M3x10 allen head screws for the bottom/top corners (13mm overall length, 5.5mm diameter head)
hot glue for securing the Pro Micro to the bottom case
The files are also hosted on Github, along with a QMK fork that contains a basic keymap and experimental VIA Configurator support. More info here
14.04.2020
slightly increased outer wall thickness around the screw holes
16.03.2020
added a small inner fillet
14.03.2020
small adjustments to the inner guides for better fitment between the upper and lower parts of the case
increased surface area of the screw holes for the upper part of the case
| VOID40OP_-_Bottom.step | 220.0KB | |
| VOID40OP_-_Bottom.stl | 954.4KB | |
| VOID40OP_-_Top_GRID.step | 600.7KB | |
| VOID40OP_-_Top_GRID.stl | 195.2KB | |
| VOID40OP_-_Top_MIT.step | 589.3KB | |
| VOID40OP_-_Top_MIT.stl | 193.4KB |
