My case for a VoCore5 with a 24 segment LED light.
You'll need:
VoCore 5"
https://vocore.io/
Arduino Pro Micro
https://de.aliexpress.com/item/32768308647.html?spm=a2g0o.order_list.order_list_main.27.228f5c5fFbl5NE&gatewayAdapt=glo2deu
2x 4 Bit WS2812 5050 RGB LED
https://de.aliexpress.com/item/1005001565652020.html?spm=a2g0o.order_list.order_list_main.167.18f35c5fjQGJWD&gatewayAdapt=glo2deu
2x 8 Bit WS2812 5050 RGB LED
https://de.aliexpress.com/item/4000278750328.html?spm=a2g0o.order_list.order_list_main.172.18f35c5fjQGJWD&gatewayAdapt=glo2deu
I also used 4x M4 threaded inserts and 4x M4 screws with washers for the back to mount to the holder bracket and 3x M3 inserts for the front with 3x M3 countersunk screws, the length depends on the inserts you used. The holder bracket gets mounted to a 4040 extrusion profile with two sets of M8 screws with T-nuts.
For connecting the VoCore 5 and the Arduino you'll need one USB-C and USB Micro-B cable each.
For the software I'm using SimHub, the VoCore 5 will be recogniced in the "Devices" tab and Dash screens can be configured under "Dash Studio", the LEDs for shifting, flags, spotter etc. will be configured under "Arduino" -> "RGB LEDs".
| Back.stl | 168.4KB | |
| Front.stl | 803.2KB | |
| Halter.stl | 87.7KB |
