The official VKB 200mm extension for my Gunfighter joystick fouls on the base of my PC chair. I created this alternate extension body so I have full range of movement without it hitting the chair when I pull back on the stick.

This requires the original inner parts of the 200mm extension and you just need to lengthen the original wire connector cable by a few inches so it reaches both ends - so you'll need some spare wire (also I recommend properly soldering the wire extensions and covering with heatshrink). If you know what type of plugs are on the wire you could possibly find a small extension cable online? Leave a comment here if you know the plug type and I'll update this description.

There is a 230mm total-length version (the print size being 200mm long) and a 200mm total-length version (the print size being 170mm long) if you want it to be as long as the original. Be sure to selected the correct size. If anyone wants a different size extension then let me know in the comments and I'll be happy to upload alternative sizes.

Print the STL on its side for maximum strength and you'll likely only need some printed support in the opening underneath the top of the extension (rectangle opening where you have access to insert the top screw and to pull the cables through).